Epoxy Resin Glue - hopsonglue

Hopson Chemical Industry

Epoxy resin glue, often referred to as two-part glue or epoxy AB glue, is also known as underwater glue or epoxy super glue. Similar to Gorilla Epoxy, it is a versatile adhesive that combines epoxy resin (component A) with a polyfunctional hardener (component B). These two components crosslink and cure, at room temperature to provide a strong and durable bond. Due to its water-resistant properties, it is particularly effective in wet or underwater environments, making it a favorite choice for various applications ranging from home repairs to industrial uses.

Hopson® is a leading epoxy adhesive glue manufacturer with extensive R&D experience, offering appropriate epoxy glue adhesives tailored to various needs and applications. Our products come in different designs and formulations to meet specific bonding requirements. Additionally, we provide OEM customization services to deliver personalized bonding solutions. Whether you have unique or complex bonding needs, Hopson® is equipped to provide a comprehensive, one-stop solution.

Hopson offers a range of two part epoxy resin glues including 5-minute epoxy, 30-minute epoxy, and other OEM formula epoxy resin adhesives. Our waterproof epoxy glue is versatile and effective on various materials such as ceramics, glass, leather, metal, plastic, rubber, wood, stone, granite, and more.

HEP-001 Clear Epoxy Glue

Packing	3+3ml/card, 12cards/box 12boxes/ctn
G.W.	6.0KGS
CTN	31.531.537cm

HEP-002 Clear Epoxy Rresin Glue

Packing	6+6ml/card 12cards/box 12boxes/ctn
G.W.	10KGS
CTN	46.537.544cm

HEP-003 White Latex Glue

Packing	12+12ml/card 12cards/box 12boxes/ctn
G.W.	16KGS
CTN	46.53847cm

HEP-004 Epoxy Glue with Mixer

Packing	7+7ml/card 12cards/box 12boxes/ctn
G.W.	12KGS
CTN	37.53549cm

1:1 mix ratio.
Waterproof, high temperature, UV light, impact resistance, sandable, and paintable.
Easy to operate: Squeeze it to the right amount according to your needs, and then apply it to the place that needs to be repaired.
Good viscosity: 5-minute set, 24 hours curing time, permanent molding, not easy to peel off.
Multi-purpose repair: hard plastic, metal, fiberglass, wood, ceramic, leather, paper.
Fill voids and bond uneven and vertical surfaces to form a dense surface without air bubbles.
Best for tough repairs requiring a durable bond, gap-filling, and solvent resistance.
Dries clear; ideal for clean, easy finishing.
Easy-to-use syringe; separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses.
Please use within two years, it can be permanently fixed after use.

Epoxy resin glue is used to bond various substances, like metal, glass, wood, ceramics, tile, and concrete.

The video of epoxy glue for glass, metal, and stone

The epoxy glue syringes used for filling HEP-001 and HEP-002 epoxy glues are identical in design, though they come in different sizes. In contrast, the syringes for filling HEP-003 and HEP-004 epoxy glues feature specialized designs. Due to these differences in syringe design, the procedures for using these epoxy glues will vary slightly.

Steps of HEP-001 and HEP-002 Epoxy Glue.

1: Clean up the areas that need to be repaired.

2: Remove the liquid epoxy glue, squeeze the amount as needed, and mix gently.

3: Apply the product to the area to be repaired within 2-4 minutes, and apply smoothing with hardwood chips.

4: Wait 24 hours, the liquid epoxy glue is fully cured and the product is repaired. At this point, you can polish and modify it as needed.

5: If the product is remaining, you can cover the product mouth with the included cover to ensure normal use next time.

Steps of HEP-003 Epoxy Glue with Multiple Uses Cap

Dispense even amounts of resin and hardener onto a clean, disposable surface.

2. Mix for 20 seconds until the mixture is uniform

3. Apply epoxy glue to the surface within 5 minutes. Bond strength will decrease the longer you wait to apply

4. Clamy surfaces together or leave undisturbed for 30 minutes.

5. Remove the cap in the middle of the piston.

6. Squeeze the cap and close the cap.

Steps of HEP-004 Epoxy Glue with Mixer

Surface Preparation – Protect the work area. Surfaces should be clean, dry, and free of grease and oil.

Roughen smooth surfaces for better adhesion.

1. Snap the cap off by pushing to the side, Do not twist.

2. Hold the syringe with the nozzle end up and pull back slightly on the plunger, allowing air bubbles to rise to the top.

3. Attach the nozzle over the syringe opening, push past prongs, and turn 90° to lock it in place.

4. Depress the plunger to dispense epoxy directly onto one side of the surfaces to be bonded.

Epoxy stick putty also known as plumbers epoxy, modeling putty, wood repair putty, or 2-part epoxy putty, is a versatile and innovative repair material designed to repair various surfaces.

This epoxy repair putty is ideal for fixing cracks, gaps, and other surface imperfections, and is often used to repair wood, metal, plastic, ceramics, etc. When using it, knead the putty until the two parts are fully blended, apply it to the damaged area, and shape it as needed. Once it cures, which usually takes a few hours, it transforms into a tough, resilient material that can be sanded, painted, or otherwise treated to blend seamlessly with its surroundings.

HEP-005 Epoxy Stick Putty

Packing	50g/card 12cards/box 12boxes/ctn
G.W.	13KGS
CTN	39.536.540cm

HEP-006 Stick Putty

Packing	25g/box 20boxes/card 12cards/ctn
G.W.	14KGS
CTN	322524cm

Can bond various materials, including metal, wood, glass, ceramics, fiberglass, stone, and hard plastics. Used for filling and repairing.
After kneading evenly, it is used to seal the leakage of pipes, drainage pipes, flowerpots, faucets, etc.
Easy to use: Only cut, hand knead until the color becomes uniform and apply to the damaged area then all you do is let It dry.
3-5 minutes: mixing time, mixing evenly. 5 minutes to 24 hours: long curing time and rapid increase of hardness. After 24 hours: completely hardened and permanently fixed.
The working temperature of the product is between – 50 ℃ and 120 ℃, and the rest is kept in a dry and cool place.

Seal pipes, stop leaks.
Fix cracks and smooth them.
Repair appliances, tools, furniture, toys, automotive parts.
Glue metal, glass, wood, plastic.
Suitable for sealing and anti-corrosion of interfaces of underground pipelines, hydropower stations, dam foundations, etc.
It is suitable for repairing cracks and honeycombs of building beams, columns, pile caps, etc.
It is suitable for bonding steel structures and concrete and can be made into wear-resistant floors.
It is used for protection against impact and abrasion, cavitation, freezing, and thawing of the overflow surface of hydraulic structures, as well as repairing after damage.

How to use epoxy stick putty

Clean the surface to be repaired to avoid impurities and grease.
On the two-component epoxy putty, take off the same amount and knead it to make it soft and keep the color uniform.
Apply the product to the location you want to repair in 3-5 minutes, you can press it properly to keep it firm.
After the repair is completed, use soapy water to clean the remaining epoxy putty as soon as possible to avoid the residue being too long to clean.
After waiting for 24 hours, the epoxy putty solidifies and becomes hard, which can be processed, drilled, knocked and

The video of epoxy putty for filling gaps

The video of epoxy putty for wood furniture repair