Shoe Repair Glue - hopsonglue

Hopson Chemical Industry

Shoe repair glue, also known as urethane shoe glue(PU glue)or neoprene glue is a translucent, solvent-based, polyurethane adhesive of medium viscosity. It has outstanding heat resistance and is especially suited for bonding leather, rubber, PVC, PU, and TPR pre-molded sole units in the footwear industry.

As a professional shoe glue manufacturer, to meet the repair needs of different shoes, Hopson supplies a variety of shoe fix glue, such as sneaker sole glue, tennis shoe glue, glue for shoe insoles, shoe heel glue, football boot glue, glue for sandals, clear shoe glue, heavy-duty shoe glue, industrial shoe glue, and OEM customized shoe glue for horse, shoe glue for strengthen pointe shoes, etc. Hopson® is committed to delivering high-quality, reliable glues that cater to diverse applications, ensuring optimal performance and durability for every type of footwear.

Shoe Repair Glue Instructions

HSA-001 Yellow Shoe Glue

Packing	15ml/card 12cards/box 24boxes/ctn
G.W.	9.0KGS
CTN	46.74334.6cm

HSA-002 Clear Shoe Glue

Packing	30ml/pcs 24pcs/box 12boxes/ctn
G.W.	13KGS
CTN	3936.529.5cm

Self-contained needle, no glue blocking after repeated use.
High strength, simple operation, replace needle and thread.
Fully transparent, beautifully bonded, not yellowing, not hard, not whitish.
Highly waterproof, soaking for 24 hours without bending.
With A wide range of uses, shoe repair glue is suitable for a variety of damages such as shoe side glue, shoe edge glue, toe glue, insole glue, sole glue, heel glue, etc.

Shoe repair glue is commonly used as a pliable adhesive for separated shoe components, as a filler on worn shoe soles, and as a sealer to repair waterproof fabrics and footwear. Besides, Shoe bond glue is also used on rubber, wood, glass, concrete, leather, veneer, china, felt, cork, hard PVC, soft foam, metal, etc.

1. Make sure that the bonding surface is clean, dry and free of dirt, and the bonding surface must be consistent

2. Squeeze out a small amount of glue on the joint side, brush the surface evenly with a brush or cotton bud

3. pull open the detached surfaces and let the glue dried for 5-10 minutes.

4. Heat it with hairdryer to get a better bonding effect.

5. Attach and press

6. Leave it for 8 hours before you wear it.

Notices

1 . Make a trial test for special materials or ask for technical advice from us
2. Avoid direct contact with skin and eyes. Flush with plenty of water if
accidentally come into contact with the glue.
3. Keep it out of reach of children.
4. Tightly seal it after use. Please keep it in dry and cool places and stay away
from fire.