Epoxy glue for metal

Feature

●Waterproof, sandable, paintable.

●Easy to operate: Squeeze it to the right amount according to your needs,

and then apply it to the place that needs to be repaired.

●Good viscosity: 5 minutes working time, 24 hours curing time, permanent molding,

not easy to peel off.

●Multi-purpose repair: hard plastic, metal, fiberglass, wood, ceramic, leather, paper.

●Fill voids and bond uneven and vertical surfaces to form a dense surface without air bubbles.

●Please use within two years, and it can be permanently fixed after use. If you have any other questions,

please feel free to contact us.

Note

How to cure

Use a hot air gun, heat lamp, or other heat sources to warm the resin and hardener before mixing or after the epoxy is applied.

At room temperature, supplemental heat is useful when a quicker cure is desired. Warning! Curing epoxy generates heat.

Use temperature range

Depending on the curing agent, epoxy resins can be used over the temperature range − 50 to 260 °C.

Epoxy adhesives based on multifunctional resins can be used up to ~ 225 °C. Shear strengths will typically

be between 35 and 70 MPa.

How to use

Steps

1: Clean up the areas that need to be repaired.

2: Remove the liquid epoxy glue, squeeze the amount as needed, and mix gently.

3: Apply the product to the area to be repaired within 2-4 minutes, apply smoothing with hardwood chips.

4: Wait 24 hours, the liquid epoxy glue is fully cured and the product is repaired. At this point, you can polish and modify it as needed.

5: If the product has remaining, you can cover the product mouth with the included cover to ensure normal use next time.

Video