Contact +86-18968246688

Epoxy resin AB glue

Epoxy resin AB glue is a permanent, waterproof adhesive. It is formed by epoxy resin (component A) and polyfunctional hardener (component B) to get crosslinked and cured. Curing can be achieved at room temperature. This two-part epoxy glue is known for high performance strength and durability. It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs, and laminating.

Available in 4 sizes - 6ml, 12ml, 14ml, 24ml.

Available liquid epoxy glue and epoxy putty stick.

Provide customized services - logo, pack, specification, etc. Please send us your request.

Options Available


How to use

Prepare materials

1. Nitrile rubber gloves
2. Safety glasses
3. A well-ventilated woskspace
4. Cleaning supplies
5. Acommercial epoxy resin and hardener mixing stick or toothpick and a pin (optional)

Use steps

Clean the surfaces on which you'll be applying the epoxy resin.

Dispense even amounts of resin and hardener onto a clean,disposable surface
Mix for at 20 seconds until mixture is uniform

Apply to surface within 5 minutes.Bond strength will decrease the longer you wait to apply
Clamy surfaces together or leave undisturbed for 30 minutes.

Remove the cap in the middle of the piston
Squeeze the cap and close the cap


● 1:1 mix ratio

● Waterproof, High temperature, UV light, and impact resistance

● Best for tough repairs requiring a durable bond, gap-filling, and solvent resistance

● Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabric

● Dries clear; ideal for clean, easy finishing

● 5-minute set; plenty of repositioning time for the perfect fit

● Forms tough bond for durability

● Easy-to-use syringe; separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses

Application Video

AB glue for glass, wood, tile, metal


In their liquid forms, resin and hardener can irricate skin and eyes, when you use, please wear protective nitrile rubber gloves and safety glasses, and work in a well-ventilated space.

Product parameters

Item No.



12+12ml/card  12cards/box  12boxes/ctn







Shelf life

24 months


What is epoxy glue?

Epoxy glue is a synthetic mixture of a resin or epoxy polymer and a hardener. When resin is mixed with a specified catalyst, curing is initiated. Used to attach or join a variety of the same or different surfaces together. Resistant to high temperatures, solvents, UV light and impact. Epoxy cures in two to 60 minutes (longer is stronger), reaching full strength in 24 hours.

What is the strength of epoxy?

A typical compressive strength value for epoxies is about 10,000psi. Specially formulated epoxy materials, have compressive strength values of over 25,000psi.

How to remove epoxy glue?

Use rubbing alcohol (isopropyl), vinegar, acetone-based nail polish remover, and acetone to remove epoxy glue.

1. Soak the metal with the epoxy glue on it in a container of rubbing alcohol (isopropyl) or an acetone-based nail polish remover. ... Unwrap the item and scrape off the loosened epoxy with a scraper. If you notice a bit of a haze is left after cleaning, wipe it away with paint thinner and a rag.

2. Vinegar works on both cured and uncured epoxy adhesive.

3. Acetone-based nail polish remover, or acetone Apply acetone to a cotton bud or paper towel and rub gently until the adhesive comes away. For fully cured epoxy resin, you can first use a hot air gun to soften the epoxy glue, and then use acetone or mechanical removal, e.g. with a spatula or paint scraper.

How long does it take for epoxy glue to cure?

Generally, the resin reaches 95% of its full cure within 24 hours and 100% of its cure within 72 hours.

The curing time of epoxy adhesiveis affected by temperature: the higher the temperature, the faster the curing speed, and The lower the temperature, the slower the curing speed.

If you want to speed up the curing speed of epoxy adhesive, you can take the following methods:

1. Buy a Faster-Curing Resin

Purchasing Hopson's faster-curing epoxy resin will speed up the drying process. Hopson quick-drying resins have a fast-acting curing agent in the formula. that will start to cure minutes after pouring.

2. Heat the epoxy resin.
You can also apply heat after you have poured the epoxy using tools such as heat guns, hairdryers, or heat lamps. Be sure to apply the heat and beware of cracking and bubbles when using this method.

3. Use UV Resin – UV Resin gets cured in around 2 minutes under a UV lamp, this is the fastest method to get your resin cured.
This is a specialized product and cannot be cast in too thick layers.

4. Increase the room temperature
Use a heating lamp or raise the thermostat to increase the room temperature. Even if the room temperature provides a few degrees, it will reduce the drying time of the epoxy resin.

Check Out The Newest Product From The Original Super Glue.

Get Inquiry

4Th Floor, Bona Plaza, No.456 of Taikang Road, Yinzhou -315100, Ningbo,China.



Product search

Please enter keyword search

Get A Quote
Get A Quote