Waterproof super glue
Hopson waterproof super glue needs a 'trigger' to activate its adhesive properties, which is typically water vapor in the air. Once set and cured, the glue is completely waterproof; It's suitable for use outdoors or indoors, you can use it where there may be high humidity such as in bathrooms or kitchens.
Super glue mini 2g and 3g for your choice
Options Availiable
2g 3g
Feature
● Easy to stick small gap
● Good fluidity, easy to penetrate into small gaps
● Large area attached to object surface
● Increase the bonding area, So as to achieve lasting adhesion, Not easy to fall off.
Using Methods
● Clean the surface of the bond
● Insert the bottle with a needle
● Evenly spread on the surface
● After use, store in a cool place
Product parameters
Item No. | HCP-101 | HCP-102 |
Chemical Composition: | ||
ChemicalFormula: | C5H5NO2 | |
Color: | Clear | |
Application temperature | Room temperature | |
Service Temperature | -65°F to 180°F (-54 to 82°C) | |
Set Time: | 10-30s | |
Full Strength: | 24 hours | |
Paintable | No | |
Expands when cured | No | |
Sandable | Yes | |
Shelf life | 2 years | |
| Packing | 2g*1pcs/card 24cards/box 12boxes/ctn | 3g*1pcs/card 24cards/box 12boxes/ctn |
GW | 6.7kg | 6.4kg |
CTN | 47*28.5*38cm | 45*33*38cm |
FAQs
FAQs
What is super glue made of?
Super glue is not like other adhesives, especially water-based. Super glue is made of cyanoacrylate, which is an acrylic (plastic made from a chemical called methacrylate.) monomer (a molecule that can be bonded to other identical molecules to form a polymer .) and transforms to a plastic state after curing. This cyanoacrylate super glue is widely used, which can form strong bonds on materials such as metal, ceramic, leather, rubber, vinyl, some plastics, and many similar surfaces.
What is a super glue accelerator?
Super Glue Accelerator, also known as CA glue "activator," contains active components dissolved in a hydrocarbon solvent. is used to significantly speed up the drying time of cyanoacrylate super glues and ensure that excess adhesive is fully cured. The CA glue accelerant is a solvent-based product that can be applied before or after the CA glue application.
Will super glue work on wood?
Super glue, also known as cyanoacrylate glue(Referred to as CA glue). This instant-bonding adhesive creates a tight, nearly unbreakable bond, It is perfect for bonding wood.
Can super glue close wounds?
For skin incisions that are not very deep, super glue is the best choice for closing the wound for healing. Instead of sutures. Using the version formulated for medical use (N-Butyl cyanoacrylate adhesive), not cyanoacrylate super glue.
What's the difference between epoxy and super glue?
Difference | ||
State | Super Glue is a thin, transparent liquid | Epoxy is a hard gel-like agent |
Component | One-component Cyanoacrylate | Two-part component(Epoxy resin and curing agent) |
Viscosity | 80-120cps (25℃) | 12000-15000cps (25℃) |
Epoxy glue can form a huge structural strength than super glue | ||
Cure time | 10-15 seconds, full strength in 24 hours | 2 to 60 minutes (longer is stronger), full strength in 24 hours. |
Properties | Both form a very strong bond | |
Hopson super glue VS Gorilla glue
Hopson super glue is a cyanoacrylate adhesive, while gorilla glue is a polyurethane.Unlike Gorilla Glue, Hopson super glue does not need extended clamp time or moisture to activate.
Hopson super glues come in different sizes and forms such as liquid or gel. super glue liquid is perfect for non-porous surfaces. Super glue gel is perfect for porous surfaces.
What is the super glue remover?
Acetone
Acetone is the key ingredient in most nail polish removers.The best way to remove super glue from the skin is to use acetone(nail polish remover) with buffers in it, to avoid irritation. You can also find acetone at your local hardware or paint store.
Note: For fabric: Use acetone, test first to avoid potential damage. Once the adhesive bond has begun to break, apply a pretreatment stain remover deep into the glue.
If you need to remove the super glue but do not have acetone, you can use butter can help separate fingers that are stuck together with super glue. Try soaking the skin in warm water first, then rub butter onto the super glue to dissolve the bond. Apply more oil and massage the area until the glue is gone
Check Out The Newest Product From The Original Super Glue.
Get Inquiry